Chiffon Hemming Techniques (With Tape, Serger or Sewing Machine) Update 05/2022

When things go tough, their beauty appears to fade. That appears to be the case with certain particularly lovely materials. The more difficult they are to work with, the less enthusiastic they get about the cloth. Cotton isn’t available in every fabric.

How to hem chiffon: You may sew chiffon by hand, and you should simply sew normally, leaving a 1/4 inch hem allowance for the first stitches. Fold the raw edge in and sew the hem again, picking up a strand or two of the fabric fiber and the initial stitch.

How to Hem Lightweight Fabrics | Two Ways of Hemming a Chiffon Fabric

Continue reading our article to learn about additional ways to sew a hem on chiffon garments. It contains all of the information you’ll need to work with chiffon and create your own stunning ensembles.

Can Chiffon be Hemmed?

Yes, you can hem it. Because chiffon is such a slick and slippery fabric, it may take some practice. Chiffon is a tough fabric to deal with due to its structure. This problem can cause a lot of frustration and take away the beauty of the cloth.

Hemming chiffon fabrics can be done in two ways. The first option is to hem the fabric by hand, which may be a nice option if you have a lot of free time. The second method is to sew with your sewing machine.

The second method is more simpler, and you have various options for hemming chiffon garments. When utilizing your machine, the difficulty is to keep the material from slipping and sliding all over the place.

Do You Have to Hem Chiffon?

Nothing we’ve found suggests that chiffon can be worn without being hemmed. Every article about chiffon discusses how to correctly hem it. Nothing about chiffon suggests that it should be worn without a hem.

Hemming the fabric is the finest way to manage it. That way, you won’t have any snags, frayed or unraveled ends, or other issues. Using a decent nylon or fabric tape is one of the techniques to hemming chiffon.

While hemming, these adhesives keep the cloth in place. They should reduce the amount of slipping and sliding you do while working. You will experience less frustration as a result of this.

However, in response to the question, it should be hemmed. If not for the sake of appearance. Any outfit looks nice, tidy, and gorgeous with a good hem.

How to Finish Chiffon Edges

Using a rolled hem presser foot is one option. This tool has the virtue of making handling edges much easier. It’s also simple to attach to your sewing machine. You can then use many stitches to complete the task appropriately.

The negatives can be reduced to only a few. If you don’t have any experience sewing with chiffon, this is not the best option. You might also need to purchase a hem presser foot, which you might not have room for in your sewing budget.

Another option is to use fabric tape. This is a quick and easy approach to get chiffon fabric to obey your orders. The tape is simple to apply, adheres well, and does not damage the cloth.

The disadvantage is that you may need to sew certain tape alternatives in place before using it successfully. If you’re not careful, it might potentially spoil the aesthetic of your outfit.

How to Hem Spandex - Spandex Simplified

How do You Hem Chiffon With a Sewing Machine?

Sew a basting line about 1/4 inch inside the raw edge as the first step. Then, stopping at the basting line, fold the fabric in towards the wrong side. After that, you use an iron to press the fold.

After that, sew another pair of stitches about an eighth of an inch from the edge. Trim the raw edge as near to the new stitch line as you can without jeopardizing the stitches’ integrity.

Fold the fabric again and sew the third circle with a straight or edge stitch. Now hit the final fold, and you’re finished.

The Rolled Hem On Chiffon

Install a rolled hem presser foot on your sewing machine first. If you follow the directions exactly, there will be no problems later. Second, without putting the material into the guide, drop the presser foot into place. Now, 1/4 inch from the edge, sew a basting stitch.

Feed the material into the presser foot guide as you stitch. From one side, bend the raw edge over and under the opposite side. Now sew around the hem slowly and gently.

When you’ve finished the hem, push it into place. Then you’re finished. The rolled hem presser foot should make all the difference and making rolled hems a breeze.

The Narrow Hem On Chiffon

  • Begin by marking your hemline. Sew a line approximately 1/8 of an inch below that mark with a short stitch length.
  • Step 2: Fold the fabric over and sew another one as near to the fold as possible along that stitch line.
  • Step 3: Using very sharp scissors, cut away the superfluous cloth. Cut as near as possible to the second stitch line without cutting it.
  • Step 4: Fold the hem up and over the raw edge once more. Prepare to iron by sewing a third stitch line on top of the second.
  • Step 5: Iron the hemline to ensure it looks beautiful and stays put. Your assignment is finished after that is completed.

It will require some patience and effort to work with Chiffon. When sewing chiffon, go slowly since you never know when it will fall out of place. Even if you’re not making a hemline.

How to Hem Chiffon With a Serger

Remove the thread from the left needle before doing anything else. When using a serger sewing machine, this process applies to both narrow and rolled hemlines.

Reduce the stitch length and width, keeping the length just above the shortest setting possible.

Lower your upper looper tension while increasing your lower looper tension. Begin serging with the right side of the material up. That’s how those two hemlines are made. A serger sewing machine is used.

Fold the cloth at the hemline towards the wrong side of the fabric and press for a blind hem. Fold the fabric again, this time to the right side, leaving a little space around the fold area.

Remove the right needle and thread your serger with three threads. The needle tension should be 0-2; the top tension should be 5 to 7, and the lower tension should be 2-4.

Now, with the wrong side up, enter the cloth so that the needle is just barely inside the fabric. Sew away, and when you’re finished, pull the edge and fold in opposing directions to finish.

TT26 HOW TO - Hemming Chiffon - YouTube

How to Hem Chiffon by Hand

You’ll need a lot of patience because you’re working with a very slick fabric. However, if you have the time, it is possible. Begin by threading your needle with a light thread that matches the chiffon fabric’s hue.

Sew a stitch line 1/4 inch inside the raw edge next. Fold the cloth up to the stitch line on the wrong side and begin plucking up the fabric fibers and one stitch. Then sew a second line in the same manner.

Do this until the hem is finished, then iron it.

How to Hem a Chiffon Dress Without Sewing

You must first decide where the hem will go, like with any other hemming attempt. This necessitates putting the dress on and adjusting the length to your liking. After that, add your hem allowance to ensure you have enough fabric to work with.

Get your hemming or fusible tape out and trim it to the size you require. Place the tape where you want the hem to be on the dress or skirt and fold the hem into place. If you like, you can pin it in place.

Once the iron is hot enough, simply press with it to create an immediate hem. Make careful you read and follow all of the fusible tape’s directions. Also, use a pressing towel to protect the chiffon from direct heat.

Can You Hem Chiffon With Tape?

Yes, you can, and if you’re short on time, it’s the quickest way to finish the hem. Hemming or fusible tape, of course, should be considered a temporary fix rather than a permanent one.

Pins, scissors, and your iron are all you’ll need to apply the tape. To prevent further damage to your chiffon ensemble, use a pressing cloth. Keep the fabric wrong side up to safeguard the outfit’s outside from damage.

Your hem should be finished in a few minutes, and you may put the outfit on straight away.

How to Hem Chiffon With Tape

The important thing is to get the tape to the proper length. This isn’t as difficult as it may appear, and once you’ve cut the tape, your hemming process should go much faster. Place the tape together with your hem allowance and fold the allowance to the wrong side once it’s been cut.

Press the clothing using a low or chiffon setting on your iron. Cover the chiffon material with a pressing cloth to prevent direct heat from reaching it. You should be done ironing after you’ve completed. Allow the clothing to cool before putting it on.

 

Hemming a Chiffon Dress

If you’re planning to use tape or your sewing machine, this shouldn’t be too tough. Using a serger sewing machine is virtually as simple as using fusible tape. The secret is to acquire the dress’s length first, then leave yourself enough hem allowance to work with.

The quantity of effort required will be determined by the sort of hem you choose for the dress. Hemming a dress composed of chiffon fabrics can be done using any of the methods listed above.

Keep in mind that hemming bridal gowns and comparable clothes is much more difficult.

Hemming a Chiffon Scarf

You must first cut the fabric to size. Make sure you leave extra room for the hem allowance, which is typically 1 inch. Second, create the first fold by folding the hem allowance under. Make a second fold about 1/8 to 1/4 inch to the right of the previous fold. Both should be pinned in place.

Sew the initial fold all the way around in the third step. Trim any surplus material and fold the corners to make them nice and tidy. The second fold should be pinned and sewn all the way around. After that, press.

Some Final Words

You should be able to deal with chiffon on your next sewing job if you have the patience. Adding hems to chiffon garments takes time, so take it slowly and carefully.

The most difficult aspect about sewing with chiffon is keeping it motionless. You’ll have to design safe ways to grip the slippery fabric as you work because it will move on you. However, once you’ve completed it, the chiffon ensemble should look fantastic.

Leave a Reply

Your email address will not be published.