How to Replace a Tupperware Lid That Has Warped (Fixing Common Problems) Update 05/2022

Tupperware has a long history. Almost certainly, you have a relative who has owned or marketed Tupperware items. Unfortunately, this company’s plastic isn’t up to par. It has problems of its own that stem from basic human error.

How to mend a warped Tupperware lid: When plastic becomes warped, it can be reformed. Plastic from Tupperware is no exception. Some people microwave the deformed lid for a minute or two before placing a flat heavy object over it to straighten it out.

How to Fix a Warped Tupperware Lid (Fixing Common Problems)

Continue reading this article to learn more about how to fix a warped plastic Tupperware lid. It contains the information you require as well as some potential answers. However, no assurances can be provided because each circumstance is unique.

Can You Fix a Warped Tupperware Lid?

This is a simple yes/no question. There are both positive and bad success tales. The extent to which the Tupperware lid is twisted will determine the outcome. Some warps are nearly hard to escape.

The dishwasher generates intense heat, and many Tupperware plastics are not dishwasher safe. Some of the older lids are, but many are not. When you put the lids in the dishwasher, they will warp to the point where they may be hard to repair.

Some fixes are possible, but they are heat-dependent. That is probably the only thing that can be used to reshape plastic. The key is to not overheat the lid because this will only add to the damage and the lid may not be covered by Tupperware’s lifetime warranty.

How to fix a Warped Tupperware Lid

As previously stated, heat will be the most important factor in repairing a warp. Heat was responsible for warping the plastic cover in the first place, and heat will be required to repair it. Fighting fire with fire is a one-time solution.

Put the lid in your microwave and turn it on as a solution. Varying thicknesses of plastic will respond to different levels of heat, therefore the heat level will be determined through trial and error.

As well as the deadline. You don’t want to leave the cover in the oven for too long because it will become damaged. Try it for a minute at a time, then place a heavy flat object on top of the lid to restore its previous size.

Another option is to place the lid in boiling water for a short period of time, then either lay it flat without any weight or apply a small amount of weight to assist the plastic to return to its normal shape.

The key is to be cautious and remember that the lid is quite hot. It will not be a problem if you are underweight for a long time.

Tupperware Lid Won’t Close

With older Tupperware lids, this is a regular issue. It affects nearly everyone, therefore you are not alone. One option is to wash the lid for one cycle in the dishwasher.

Then, while the lid is still warm, return it to the bowl it came from and let it cool. When the lid cools, it will reconfigure itself and still be able to grab the bowl lip.

If you don’t have a dishwasher, you can put the lid in the microwave with a boiling kettle of water, then set it back on the bowl to cool. The length of time in all three possibilities will be crucial.

When plastic is exposed to severe heat over an extended period of time, it might melt or distort further. Also, because microwaves heat from the inside out, you must be careful not to damage the lid’s integrity when utilizing that equipment.

Tupperware Lid Too Loose

This will be a difficult maneuver since shrinking plastic to the point where it fits perfectly and keeps the food inside fresh is difficult. You can attempt the procedures we provided above to see if they help tighten the lid, but they may not work in most circumstances.

Signs You Should Get Rid Of Your Current Set Of Tupperware

In this instance, it’s advisable to contact Tupperware directly to verify if the lid is covered by the company’s limited lifetime warranty.

Here’s a link to the page on their website where you can learn how to replace your lid.

There is no method to report an alternate solution other than contacting the manufacturer because no one is talking about decreasing a lid. The issue with shrinking plastic, especially for something as important as food preservation, is that it must be done evenly.

If one of the parts does not shrink, the seal you desire will not be achieved. Tupperware plastic, like any other plastic, can be problematic in this situation since it’s not only about the shape or fit; it’s also about getting a tight seal.

Tupperware Lid Doesn’t Fit

If the lid is too loose, it may be necessary to replace it with a larger bowl. If it still won’t fit, you might be able to loosen the lid enough to get it to fit snugly using the ways we’ve already discussed.

The approach where you boil the lid for about 15 minutes and then lay it over the bowl it belongs to is the greatest of all the procedures we’ve already given.

The seal and the plastic should reshape themselves and achieve a perfect fit when the lid cools. Because this is not a failsafe procedure, we suggest should. When it comes to plastics, everything is a matter of degree because plastic is not the most durable material available.

It can be a nightmare to return plastic to its former shape once it has lost its shape. You can attempt the boiling water approach or the microwave option numerous times to see if the lid returns to its original shape, but be careful not to overheat the plastic.

Broken Tupperware Lid

There is a solution to restore cracked plastic lids before you toss it away and after you discover it may not be replaced by Tupperware (its lifetime policy does have limitations). It only takes one specific tool and some time.

It is possible to reassemble damaged plastic with solder. You might believe that soldering is only used for electronics and light metal components, however this is not the case. Broken plastic components can be repaired with a soldering iron.

The good news is that Tupperware lids aren’t the only option. Most broken plastic components can be repaired by welding them together. The following are the steps you must take:

1. Preheat a normal soldering station or iron. Simply make use of the one you currently have. If you don’t have one, the simplest one will suffice.
2. The best tip to use is the flat one. It has a larger surface area.
3. Collect some useful scrap plastic objects. When the plastic is too thin to fuse together properly, they come in helpful. Use these pieces as solder, or drill a hole in the broken plastic and fill it with these pieces.
4. If the plastic feels fragile, you can strengthen the weld by first gluing the parts together with crazy glue and then adding the weld. Alternatively, staple the two sides back together.
5. Take precautions to safeguard yourself. Welding plastic together produces harmful fumes, therefore use the appropriate face mask and gloves. The plastic will become quite hot, and you must take precautions to avoid burns.
6. Solder as you would metal, then let the plastic cool before inspecting the weld for strength. If not, you may need to melt some of the discarded plastic pieces over the weld to increase strength.

Tupperware Lid Bent

The simplest answer to this problem is to contact your Tupperware representative and determine if the lid meets the parameters of Tupperware’s limited lifetime warranty on all of its products.

If the bent lid does not qualify, you can use one of the three fixes we’ve already offered. Of course, the severity of the bend will determine their success. Some bends may be too difficult for those easy solutions, but they are a good place to start.

Another option is to fill a bowl with cool water, replace the lid as best you can, and microwave the whole thing for a minute or two. After the water has been heated, try to bend the warm plastic that has been rendered malleable by the steam.

My Tupperware Lid is Stuck After the Microwave

This happens frequently because many individuals believe that microwave-safe includes plastic covers. It is preferable not to microwave anything with a plastic lid unless it is actually microwave-safe in many circumstances. This vulnerability might even affect Tupperware.

Woman Shares Hack To Get Rid Of Greasy Tupperware Stains On TikTok - Tyla

The first tip is to return the bowl to the microwave and reheat it for a brief period of time. Pull the bowl back out and, without waiting for the lid to cool, remove it. This is the most straightforward technique.

Some have proposed prying the lid off with dull butter knives, but this is a very rudimentary method that may not work or damage the lid. Alternatively, you risk burning yourself once the lid is removed and hot steam begins to escape.

Tupperware Lid Melted in the Dishwasher

In this case, you might only have one option for a solution. Contact Tupperware using the website provided above, or speak with your Tupperware representative first to see what they have to say. The issue with the latter option is that your representative’s personality may not be as helpful as you would like.

Throwing it out may be your only option for dealing with the lid. In the case of your dishwasher, it’s possible that changing the element is the only option. There are methods for eliminating melted plastic from the environment, however they do not always work.

You can try putting ice on the melted plastic for 30 minutes and then peeling it off, although this does not always work. You can also scrape the plastic off with a dull knife, although the results may be disappointing after a lot of effort.

Using your hair dryer is one approach that might work. Make sure the dishwasher element is completely cool and that the appliance is empty. Then, using a dull piece of wood or another item, scrape the plastic off with your hairdryer to warm it up (non-plastic).

Then wipe away any remaining plastic residue with a warm moist towel. After that, simply run a hot cycle in your empty dishwasher to burn off any remaining plastic that you couldn’t remove.

Why Are My Tupperware Lids Sticky?

To avoid voiding your Tupperware warranty, consult their website for the best cleaning solutions for their bowls, plates, and other items. The official Tupperware treatment is baking soda and water, which will not void the guarantee.

You can also use vinegar and water, but double-check with your Tupperware agent or the company itself before using this or any other home cure.

Lack of use is intended to cause the sticky sensation. One person omitted the baking soda solution and instead used Murphy’s Oil. They reported positive outcomes.

This website has a number of home cures that you can try, but as always, double-check before utilizing.

Tupperware Cover Alternative

Many people have a bad opinion of plastic products. The reason for this is that plastic does not biodegrade and will remain in landfills or the oceans indefinitely. They’ve come up with a variety of options for covering your Tupperware dishes.

Switching to glass storage jars instead of plastic bowls and lids is one possibility. Alternatively, you can use biodegradable paper or cotton snack bags. As an alternative, any non-plastic bag will suffice.

There is compostable cling wrap available. They’re made of corn and are equally as effective as plastic covers. Some of the concepts these folks came up with are bizarre, while others are simple common sense that anyone would use.

Cover your Tupperware dish with a rubber band or non-plastic paper, for example.

Do Tupperware Lids Shrink?

Because it is plastic, the answer to this question is yes. Or, to put it another way, they will distort in such a way that the lid will no longer fit. However, if the lid has not shrunk significantly in size or shape, it may be re-fitted.

Heat the bowl evenly, then check to see if the lid fits. If it doesn’t, don’t heat the lid; instead, keep heating the bowl until the lid fits properly. Once you’ve achieved that goal, chill the bowl and lid down quickly to keep the shape.

You can try heating the lid; instructions will be provided in the following section.

How to Stretch Tupperware Lids

When it comes to plastic, heat will always be a part of the solution. Heat is required to shrink or reshape plastic material, as well as to stretch it out somewhat. You won’t or shouldn’t try to acquire a lot of stretch because it will compromise the lid’s integrity and cause uneven results.

Small stretches are acceptable, and you can warm the lid under running hot water before replacing it on the bowl until it cools. Alternatively, you can soak and seal the lid in hot water for around 15 minutes before fitting it over the bowl.

The dishwasher is a possibility, but according to our study, it may be the item that voids the guarantee, so be cautious. Even 60-year-old Tupperware is still covered by the manufacturer’s warranty.

How to Get Tupperware Lids Replaced

Contact your Tupperware representative first. They should be aware of the proper process and be able to examine the lid to determine the extent of the damage. If you don’t know the rep’s name or phone number, go to the Tupperware website and look for one in your area. They have a website where you may find a rep.

You can also contact 1-800-Tupperware and speak with the firm directly if you don’t want to take that step because not all reps are that helpful. You can also contact them through their website. The directions for doing so can be found at the website above.

These are the two approaches you should use, and interacting directly with the corporation may save you time and effort.

Can Tupperware Lids Be Recycled?

Yes, and most Tupperware goods, including lids, are labeled with the #1 or #2 recycling mark. Those indicators indicate that they will be accepted by practically every recycling facility.

Of course, you’ll have to clean the lids and other Tupperware items you don’t use anymore. You should also have them empty and dry if they are containers. Even Tupperware with the #5 label should be recyclable.

If you wish to recycle the containers, make sure to include the lids and place them on the containers before dropping them off in a recycle bin or at a recycling facility. Recycling plastic lids is preferable to throwing them away, and cracked, melted, bent, and other types of plastic lids should be recycled as well.

Plastic materials have no place in landfills or seas, therefore recycle all plastics, even if they aren’t Tupperware.

What to do With Tupperware Lids

Never discard them. Contact Tupperware for a replacement if they don’t fit the bowl or other container, then recycle the lids. Alternatively, you might use one of the numerous methods already discussed to get them to fit the correct container once more.

The Tupperware containers are simple to repurpose, but the lids are more difficult. Recycling them is the greatest choice because the material may be reused. Remember that even damaged plastic Tupperware lids may be welded back together and reused.

Final Thoughts

Heat is required to repair Tupperware lids. That is the first thing you must prepare. The trick is to select the proper temperature and heat source to avoid damaging the lid or voiding the warranty.

Here is the main Tupperware website URL, which you can use to explore the site for more useful information. Alternatively, speak with your Tupperware dealer to ensure you’re getting the correct aid when the lids stop working.

Leave a Reply

Your email address will not be published.